Flos

Catálogo Architectural 2008 Página 26

Ver descripción

?026 DESCRIPTION Suspension luminaire using steel wires (L=4000 mm) with die-cast aluminum, easy-adjustment ceiling fittings. For linear fluorescent lamps, standard or dimmable. One or more units can be joined and wired together. Available in three versions: -  Indirect for indirect lighting only; -  Comfort for direct (64%) and indirect (36%) lighting; -  High Comfort for direct (44%) and indirect (56%) lighting or only for direct lighting by means of a special accessory provided with the luminaire for total screening of indirect light. The last version is ideal for installation in workplaces where visual display terminals are used. Powder-coated extruded aluminum body. Hand- polished aluminum end caps protected with a transparent liquid coat of paint. Cut/floded and galvanized steel structural parts. Electromechanical head connection that has two feed-through electric lines with a quick- connecting electromechanical joint in V1 polycarbonate. Finishes: white (09), grey (20). REFLECTORS - Indirect lighting: Super-pure aluminum with specular finish. - Comfort: Aluminum with light satin finish. - High Comfort: Super-pure aluminum with specular finish (Miro II). LAMPS T5 fluorescent tubes, FH/FQ (diameter 16 mm), G5 lamp-holder; in the following power versions: Indirect: 2 x 28W; 2 x 35W; 2 x 54W; 2 x 80W. Comfort and High Comfort: 2 x 28W; 2 x 35W. POWER SUPPLY 1 or 2 next-generation electronic power supply units, standard or dimmable (digital), included. ACCESSORIES - 21 mm polished aluminum end cap, with 4000 mm wire - Pair of 21 mm polished aluminum end caps, with 4000 mm wire - 21 mm wired linear joint, with 4000 mm wire - 250 mm wired L-, T-, cross-joints, with 4000 mm wires - Die-cast aluminum power supply rosette with: - 1-line three-pole cord; - four-pole cord for dual on-off switching or dimming. ADDITIONAL INFORMATION All luminaires to be completed with power supply rosette and end caps. Emergency versions for  Comfort and  High Comfort . IP20 protection. Class I insulation. Suitable for installation on normally inflammable surfaces. STANDARD COMPLIANCE AND QUALITY MARKS EN60598-1 European Technical Standards and any subsequent additions; ENEC Electrical Safety Mark. COLOURS COLORES ?09 WHITE BLANCO 50 POLISHED ALLUMINIUM ALUMINIO PULIDO 20 GREY GRIS DESIGNED BY ANTONIO CITTERIO AND OLIVER LOW U-BEAM CONNECT

Página 26 / 93

  • 100% productos originales
  • Paga con tarjeta de crédito
  • Paga con tarjeta de crédito
  • Pago con Stripe
  • Pago por transferencia bancaria
  • Envíos seguros (Seguro de transporte)
  • 2 años de garantía

Añadiendo productos al carrito